Pass Cisco 300-815 Exam with Guarantee Updated 120 Questions
Latest 300-815 Pass Guaranteed Exam Dumps Certification Sample Questions
The Cisco 300-815 certification exam is designed to test the skill level of network professionals in implementing advanced call control and mobility services in Cisco environments. This exam is ideal for individuals who are seeking a career in the field of networking or for those who are already working in the industry and want to advance their skills and knowledge. The certification is also a great way for network professionals to demonstrate their expertise to their employers and peers.
NEW QUESTION # 68
Refer to the exhibit.
An administrator is troubleshooting a problem in which some outbound calls from an internal network to the Internet telephony service provider are not getting connected, but some others connect successfully. The firewall team found that some call attempts on port 5060 came from an unrecognized IP that has not been defined in the firewall rule. What should the administrator configure in the Cisco Unified Border Element to fix this issue?
- A. bind signaling and media to the loopback interface
- B. ip prefix-list to filter the unwanted IP address
- C. use of port 5061 for SIP secure
- D. access list allowing the firewall IP
Answer: A
NEW QUESTION # 69 
Refer to the exhibit. Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?
- A. rule 1 /^\([2-9]..[2-9]......$\)/ /\1/
- B. rule 1/^\+1\([2-9]..[2-9]......$\)/ /\1/
- C. rule 1 /^/+\([^1].*\)/ /011\1/
- D. rule 1 /^\+1\([2-9]..[2-9]......$\)/ /\0/
Answer: B
Explanation:
Section: Cisco Unified Border Element
Explanation/Reference:
NEW QUESTION # 70
Which top-level IOS command is needed to begin the configuration of a Cisco Unified Communications Manager Express gateway to enable phones to be registered via SIP?
- A. voice register global
- B. voice register dn
- C. allow-connections sip to sip
- D. voice service voip
Answer: D
NEW QUESTION # 71
Why would RTP traffic that is sent from the originating endpoint fail to be received on the far endpoint?
- A. The RTP traffic is arriving beyond the jitter buffer on the receiving end.
- B. A firewall in the media path is blocking TCP ports 16384-32768.
- C. The far end connection data (c=) in the SDP was overwritten by deep packet inspection in the call signaling path.
- D. Cisco Unified Communications Manager invoked media termination point resources.
Answer: A
NEW QUESTION # 72
Configure Call Queuing in Cisco Unified Communications Manager. Where do you set the maximum number of callers in the queue?
- A. in Cisco Unified CM Service Parameters
- B. in Cisco Unified CM Enterprise Parameters
- C. in the telephony service configuration
- D. in the queuing configuration
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/200453-Configure-CUCM-Native-Call-Queuing-Featu.html
NEW QUESTION # 73
An administrator discovers that employees are making unauthorized long-distance and international calls from logged-off Extension Mobility phones when the authorized users are away from their desks Which two configurations should the administrator configure in the Cisco UCM to avoid this issue? (Choose two.)
- A. Remove the long-distance & international pattern's partitions from the calling search space of the physical phone.
- B. Add the long-distance & international pattern's partitions to the calling search space of the physical phone's directory number.
- C. Remove the long-distance & international pattern's partitions from the calling search space of the device profile.
- D. Add the long-distance & international pattern's partitions to the calling search space of the device profile
- E. Add the long-distance & international pattern's partitions to the calling search space of the physical phone.
Answer: A,D
NEW QUESTION # 74
Which call pickup feature allows users to pick up incoming calls in a group that is associated with their own group?
- A. Directed Call Pickup
- B. Group Call Pickup
- C. Other Group Pickup
- D. BLF Call Pickup
Answer: C
Explanation:
Section: Cisco Unified CM Call Control Features
Explanation/Reference: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/ a07cpick.html#wp1022865
NEW QUESTION # 75
A user's phone is already configured for Single Number Reach, and the user wants a feature to move an active call from a mobile phone to a desk phone and vice-vers a. As an administrator, which additional configuration should be made to fulfill the user's request?
- A. Check to make sure that the Resume softkey option appears on the desk phone.
- B. Add the mobility key to the softkey template that the desk phone is using.
- C. Use Dialed Number Analyzer to determine if the user extension can dial the mobile phone.
- D. Confirm that the desk phone is subscribed to Cisco Extension Mobility.
Answer: B
NEW QUESTION # 76
An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?
- A. debug H.225 asn1
- B. debug H.323 asn 1
- C. debug H.323 messages
- D. debug H.246 asn 1
- E. debug H.225 media
Answer: A
NEW QUESTION # 77
What is first preference condition matched in a SIP-enabled incoming dial peer?
- A. answer-address
- B. target carrier-id
- C. incoming uri
- D. incoming called-number
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/voice/ip-telephony-voice-over-ip-voip/211306-In- Depth-Explanation-of-Cisco-IOS-and-IO.html#anc8
NEW QUESTION # 78
An administrator is implementing a new dial-plan on Cisco Unified Border Element. The administrator must ensure that incoming dial-peers are matched based on the IP address from where the incoming request originates. Which dial-peer configuration should be applied to accomplish this requirement?
- A. dial-peer voice 1 voip
incoming url to - B. dial-peer voice 1 voip
incoming url via - C. dial-peer voice 1 voip
incoming url request - D. dial-peer voice 1 voip
incoming called-number
Answer: B
NEW QUESTION # 79
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C.
Which two scenarios are correct? (Choose two.)
- A. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- B. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
- D. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- E. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
Answer: B,D
NEW QUESTION # 80
If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern "123"?
- A. 1XX (urgent Priority Set)
- B. 12!
- C. 12[2-5]
- D. 12X (urgent priority set)
Answer: C
NEW QUESTION # 81
What are the elements for Device Mobility configuration?
- A. device pool, Device Mobility group, and Cisco IP phone
- B. physical location. Device Mobility group, and region
- C. device pool, Device Mobility group, and region
- D. physical location, device pool, and Device Mobility group
Answer: D
Explanation:
Reference:
https://www.ciscopress.com/articles/article.asp?p=1249228&seqNum=4
NEW QUESTION # 82
What is first preference condition matched in a SIP-enabled incoming dial peer?
- A. answer-address
- B. target carrier-id
- C. incoming uri
- D. incoming called-number
Answer: C
Explanation:
Section: Signaling and Media Protocols
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/voice/ip-telephony-voice-over-ip-voip/211306-In- Depth-Explanation-of-Cisco-IOS-and-IO.html#anc8
NEW QUESTION # 83
A single site reports that when they dial select numbers, the call connects, but they do not get audio. The administrator finds that the calls are not routing out of the normal gateway but out of another site's gateway due to a TEHO configuration. What is the next step to diagnose and solve the issue?
- A. Verify that the dial peer of the gateway has the correct destination pattern configured.
- B. Verify that IP routing is correct between the gateway and the IP phone.
- C. Verify that the route pattern is not blocking calls to the destination number.
- D. Verify that the route pattern has the correct calling-party transformation mask
Answer: A
NEW QUESTION # 84
Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)
- A. can be assigned directly to the route pattern
- B. chooses the route group that is configured under the device pool of the calling-party device
- C. can be associated only under the route list
- D. can be associated under the route group
- E. chooses the route group that is configured under the device pool of the called-party device
Answer: B,C
NEW QUESTION # 85
Refer to the exhibit.
An administrator is troubleshooting why users are not hearing audio when dialing long distance numbers across their Cisco Unified Border Element. The customer's carrier has a requirement that dialing long distance requires an access code to be entered. Looking at the exhibit, what two actions can be taken to correct signaling? (Choose two.)
- A. Enanle PRACK.
- B. Enable Mid-Call Signaling Consumption.
- C. Enable Media Flow Around
- D. Enable Early Offer on the Cisco Unified Border Element.
- E. Enable the supplementary-service media-renegotiate command.
Answer: A,D
NEW QUESTION # 86
What are the elements for Device Mobility configuration?
- A. device pool, Device Mobility group, and Cisco IP phone
- B. physical location. Device Mobility group, and region
- C. device pool, Device Mobility group, and region
- D. physical location, device pool, and Device Mobility group
Answer: D
NEW QUESTION # 87
Which action is correct with respect to toll fraud prevention configuration in the Cisco Unified Communications Manager Express?
- A. Configure IP Address Trusted Authentication for Incoming VoIP Calls.
- B. Configure the command no ip address trusted authenticate under "voice service voip".
- C. Enable Secondary Dial tone on Analog and Digital FXO Ports.
- D. Configure Direct Inward Dial for Incoming ISDN Calls with overlap dialing.
Answer: A
NEW QUESTION # 88
A support engineer is troubleshooting a voice network. When conducting a search for call setup details related to calling search space issues, which trace files should be investigated?
- A. Cisco IP Manager Assistant
- B. Call logs
- C. CallManager traces
- D. CTI Manager traces
Answer: C
Explanation:
Section: Signaling and Media Protocols
NEW QUESTION # 89
Which IOS command creates a SIP-enabled dial peer?
- A. dial-peer voice 20 pots
- B. dial-peer voice 20 voip
- C. dial peer voice 20 sip
- D. voice dial-peer 20 sip
Answer: B
Explanation:
Section: Cisco Unified Border Element
Explanation/Reference: https://www.ciscopress.com/articles/article.asp?p=664148&seqNum=6
NEW QUESTION # 90
......
The Cisco 300-815 exam is a challenging exam that requires a deep understanding of Cisco technologies and their application in advanced call control and mobility services. The exam consists of multiple-choice questions and simulations that test the candidate's knowledge and skills in implementing advanced call control and mobility services using Cisco technologies.
New 300-815 Test Materials & Valid 300-815 Test Engine: https://realexamcollection.examslabs.com/Cisco/CCNP-Collaboration/best-300-815-exam-dumps.html