Get Ready to Boost your Prepare for your H19-401_V1.0 Exam with 892 Questions
Use Free H19-401_V1.0 Exam Questions that Stimulates Actual EXAM
The HCSP-Presales-Campus Network Planning and Design V1.0 certification program is ideal for IT professionals who wish to enhance their knowledge and skills in campus network planning and design. The program is also suitable for those who are looking to advance their careers in the field of information technology. HCSP-Presales-Campus Network Planning and Design V1.0 certification program is recognized globally, and the certification obtained is valued by employers worldwide.
Huawei H19-401_V1.0 exam is ideal for individuals who want to develop their skills in network planning and design. HCSP-Presales-Campus Network Planning and Design V1.0 certification exam covers a wide range of topics, including the principles of network design, network topology, network architecture, and network security. H19-401_V1.0 exam also focuses on practical skills such as network testing, troubleshooting, and optimization.
NEW QUESTION # 228
In CloudCampus small and medium-sized campus network design (public cloud scenario), when engineers are designing reliability for the site network, what are the items that do not need to be considered?
- A. Egress link reliability
- B. Reliability of links within the campus
- C. Cloud management platform reliability
- D. Equipment reliability
Answer: C
NEW QUESTION # 229
Which statement about tunnel forwarding and direct forwarding in WLAN scenarios is correct?
(Multiple choice)
- A. Direct forwarding is also called local forwarding
- B. During tunnel forwarding, all user service packets must first go to the AC for processing after coming out of the AP.
- C. When forwarding directly, all user service packets must go to the AC for processing.
- D. Tunnel forwarding is also called centralized forwarding
Answer: A,B,D
NEW QUESTION # 230
Which of the following descriptions of roaming are correct? (Multiple choice)
- A. Lossless roaming is achieved through technical optimization or collaborative technology to meet business requirements such as delay and packet loss, ensure business continuity, and perform roaming switching without awareness.
- B. In traditional roaming, when the terminal gradually moves away from the associated AP, it senses that the signal strength gradually decreases, and interacts with the presence of surrounding APs through Probe messages. When the terminal's signal reaches the roaming threshold, the terminal triggers the roaming to complete the AP. switching
- C. AI roaming is based on AI technology learning terminal roaming portrait, differentiated guided roaming
- D. 802.11r fast roaming uses the FT (Fast BSS Transition) function to omit the 802.1X authentication and key negotiation intermediate re-authentication process during user roaming.
Answer: A,B,C,D
NEW QUESTION # 231
What are the internal logical elements of VPC? (Multiple choice)
- A. VM
- B. vLB
- C. vFw
- D. vRouter
- E. Subnet
Answer: A,B,C,D,E
NEW QUESTION # 232
If the same user accesses two different applications, () application tokens will be generated.
- A. 0
- B. 1
Answer: A
NEW QUESTION # 233 
Refer to the diagram above, which of the following statement about dynamic bandwidth mode is correct? (Multiple choice)
- A. As shown in Figure 3, when the path from RT1 to RT3 fails, because the main path has no way to go, the blue tunnel backup path is enabled. Since 50OM bandwidth has been occupied by purple, the remaining bandwidth of the 1G link is only 500M. The remaining bandwidth of the blue tunnel is only 500M. The colored tunnel can only use the remaining 50OM bandwidth. Insufficient bandwidth cannot be preempted from the low-priority purple tunnel where services have been deployed.
- B. As shown in Figure 2, creating a tunnel with priority 2 requires a bandwidth of 50OM. In dynamic bandwidth mode, when both the primary and secondary high-priority tunnels are up, the bandwidth of the secondary path can be shared by the low-priority tunnel. , so the tunnel with priority 2 is still considered to be able to use 1G on the link RT1-RT2-RT4-RT3, so the path calculation can be successful. As shown in Figure 2, purple is a tunnel with priority 2 and bandwidth 500M.
- C. If no SRv6 TE Policy is matched, select the SRv6 TE Policy with the default priority of this address family.
- D. The tunnel supports different priorities (0, 7), 0 indicates the highest priority, and 7 indicates the lowest priority. When a high-priority tunnel does not have a suitable path during path calculation, it can preempt a low-priority tunnel. That is, the bandwidth of the primary and secondary paths of high-priority tunnels is deducted, but the bandwidth of the secondary paths of high-priority tunnels can be shared by low-priority tunnels.
- E. As shown in Figure 1 above, the available bandwidth of TE tunnels for all links is 1G. Blue indicates priority 1 tunnels (the solid line is the primary and the dotted line is the backup), occupying 60OM bandwidth. The remaining available bandwidth of the link is 40OM
Answer: B,D,E
NEW QUESTION # 234
What are the anti-packet loss technologies in Huawei's SD-WAN solution? (Multiple choice)
- A. A-FEC
- B. Multiple sending and selective receiving
- C. FEC
- D. Load balancing
Answer: A,B,C
NEW QUESTION # 235
The IEEE802.11 wireless network standard allows wireless network users to roam in different wireless bridge segments.
- A. True
- B. False
Answer: A
NEW QUESTION # 236
What are the key designs of the high-density hardware of OceanStor Pacific 9550? (Multiple Choice)
- A. Two-way pull-out + rail-free design
- B. Intraoral retraction design
- C. Double-layer air duct at the mouth
- D. Oral-to-rotating booster fan
Answer: A,C,D
NEW QUESTION # 237
The authentication protocol currently used by the authentication service is ().
- A. AAA
- B. RESTFUL
- C. OAUTH
- D. SAML
Answer: B
NEW QUESTION # 238
What kind of connection method does OceanStor Dorado NASHyperReplication support across data centers? (Multiple choice)
- A. one-To-many connection
- B. Synchronization
- C. Parallel connection
- D. Serial connection
Answer: A,B,C,D
NEW QUESTION # 239
The types of cloud devices that the cloud management solution supports to manage are not included:
- A. AP
- B. FW
- C. S switch
- D. AR router
- E. CE switch
Answer: E
NEW QUESTION # 240
SegmentRouting must cooperate with SDN controller to support traffic engineering.
- A. False
- B. True
Answer: A
NEW QUESTION # 241
Which of the following Hypel series features does OceanStor Dorado support? (Multiple Choice)
- A. HyperClone (clone)
- B. HyperCDP (Continuous Data Protection)
- C. HyperReplication()
- D. HyperSnap (snapshot)
Answer: A,B,C,D
NEW QUESTION # 242
The backup system consists of thousands of components, including front-end production applications, networks, backup servers, and backup storage.
- A. True
- B. False
Answer: A
NEW QUESTION # 243
NCE-IP supports remote disaster recovery protection deployment, and disaster recovery deployment has requirements for latency and bandwidth between the two.
- A. True
- B. False
Answer: A
NEW QUESTION # 244
Before installing the AC, please take anti-static protection measures, such as wearing anti-static gloves or anti-static wrist strap.
- A. True
- B. False
Answer: A
NEW QUESTION # 245
The 5G CPE authentication scenario supported by iMaster NCE-Campus requires the operator to provide enterprise APNs for enterprises in 5GC, and the operator's SMF equipment supports the RADIUS protocol with 3GPP extended attributes.
- A. True
- B. False
Answer: A
NEW QUESTION # 246
SRv6 Be and SRv6 Policy can be deployed based on the default slice of SlicelD slicing scheme.
- A. True
- B. False
Answer: A
NEW QUESTION # 247
SecoClient can be used to connect to the SSL VPN service of USG12000 and USG6000F.
- A. False
- B. True
Answer: A
NEW QUESTION # 248
......
BEST Verified Huawei H19-401_V1.0 Exam Questions (2026) : https://realexamcollection.examslabs.com/Huawei/Huawei-certification/best-H19-401_V1.0-exam-dumps.html