Cisco New 2023 500-220 Sample Questions Reliable 500-220 Test Engine
Feel Cisco 500-220 Dumps PDF Will likely be The best Option
Cisco 500-220 exam covers a range of topics related to Cisco Meraki solutions, including cloud networking, wireless LANs, security, switching, routing, and mobility. 500-220 exam also covers the configuration and management of Cisco Meraki devices, such as access points, switches, security appliances, and mobile device management.
NEW QUESTION # 28
A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?
- A. malware protection
- B. next-generation firewall
- C. SD-WAN
- D. intrusion prevention
Answer: B
NEW QUESTION # 29
A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?
- A. next-generation firewall
- B. malware protection
- C. SD-WAN
- D. intrusion prevention
Answer: C
Explanation:
Explanation
https://documentation.meraki.com/MX/MX_Installation_Guides/vMX_Setup_Guide_for_Microsoft_Azure
NEW QUESTION # 30
For which two reasons can an organization become "Out of License"? (Choose two.)
- A. more hardware devices than device licenses
- B. licenses that are in the wrong network
- C. expired device license
- D. MR licenses that do not match the MR models in the organization
- E. licenses that do not match the serial numbers in the organization
Answer: A,C
NEW QUESTION # 31
Drag and drop the descriptions from the left onto the permission types on the right.
Answer:
Explanation:
NEW QUESTION # 32
Refer to the exhibit.
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
- A. The MX appliance performs data encryption for inter-VLAN traffic.
- B. The MX appliance performs AMP for inter-VLAN traffic.
- C. The MX appliance performs content filtering for inter-VLAN traffic.
- D. The MX appliance performs IDS/IPS for inter-VLAN traffic.
Answer: A
NEW QUESTION # 33
What are two organization permission types? (Choose two.)
- A. Write-only
- B. Monitor-only
- C. Read-only
- D. Full
- E. Write
Answer: C,D
NEW QUESTION # 34
Which information is used to calculate whether a WAN link has high usage?
- A. total number of devices that are actively passing traffic
- B. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
- C. total historical throughput of an uplink
- D. data under Security & SD WAN > Appliance Status > Uplink > Live Data
Answer: B
Explanation:
Explanation
Which information is used to calculate whether a WAN link has high usage not how to view (To accurately identify high utilization, users must set the ISP-provided bandwidth limits under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Configuration for each uplink. If the bandwidth usage is higher than
80% of the defined limit, it will mark that uplink as High Usage.)
https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=To%20accurately%20identify%20high%20util
NEW QUESTION # 35
Which design requirement is met by implementing syslog versus SNMP?
- A. when proactive alerts for critical events must be generated
- B. when automation capabilities are needed
- C. when organization-wide information must be collected
- D. when information such as flows and client connectivity must be gathered
Answer: D
Explanation:
Reference:
Meraki_Device_Reporting_-_Syslog%2C_SNMP%2C_and_API
NEW QUESTION # 36
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
- A. Configure automatic updating of iOS devices in the Meraki installed profile.
- B. No configuration step is necessary; automatic updating is the default behavior.
- C. Create a profile with automatic update enabled and apply it to iOS devices.
- D. Create a security policy that enables automatic updates.
Answer: B
Explanation:
Explanation
By default, iOS apps provisioned through Systems Manager that are found in the App Store will self-update if automatic updates has been turned on in the Settings. For custom iOS apps, or to manually push down updates, check the following steps.
https://documentation.meraki.com/SM/Apps_and_Software/Updating_Managed_iOS_Apps
NEW QUESTION # 37
Drag and drop the descriptions from the left onto the corresponding MX operation mode on the right.
Answer:
Explanation:
NEW QUESTION # 38
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
- A. Wait for the devices to auto-renew.
- B. Renew the Dashboard license.
- C. License a network.
- D. Call Meraki support.
- E. License more devices.
Answer: B,E
Explanation:
Explanation
There are two operations in which a license can be applied, License more devices or Renew my dashboard license. This article will compare both operations and describe their behaviors.
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_-_License_More_Devi These are the two operations that enable licenses to be applied in an organization that uses the Co-Termination licensing model. According to the Meraki Co-Termination Licensing Overview, there are two ways to add licenses to an organization:
Renewing the Dashboard license: This option allows you to extend the co-termination date of your organization by purchasing new licenses for the same or longer term as your existing licenses. You can renew your Dashboard license from the Organization > Configure > License Info page or from the Meraki Dashboard homepage.
Licensing more devices: This option allows you to add new devices to your organization by purchasing new licenses for them. You can license more devices from the Organization > Inventory page or from the Meraki Dashboard homepage.
NEW QUESTION # 39
Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)
- A. site-to-site VPN
- B. high availability
- C. DHCP
- D. intrusion prevention
- E. secondary uplinks
Answer: A,D
Explanation:
Explanation
These are the two features and functions that are supported when using an MX appliance in Passthrough mode.
According to the [MX Addressing and VLANs] article, Passthrough mode allows the MX appliance to act as a layer 2 bridge, passing traffic between its LAN and WAN ports without performing any routing or address translation. However, some features such as intrusion prevention and site-to-site VPN are still available in this mode.
NEW QUESTION # 40
Which API endpoint clones a new Organization?
- A. POST /organizations/{organizationId}/clone
- B. POST /organizations/{organizationId}/new
- C. PUT /organizations/{organizationId}/clone
- D. POST /organizations/clone/{organizationId}
Answer: B
NEW QUESTION # 41
Refer to the exhibit.
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
- A. The packet is stopped.
- B. Not enough detail is available to determine the next hop.
- C. The concentrator gateway (10.128.124.62) is the next hop.
- D. The Auto VPN peer "Store 1532 - appliance" is the next hop.
Answer: B
NEW QUESTION # 42
Which type of authentication protocol is used when using OSPF on an MX appliance?
- A. plaintext
- B. SHA-1
- C. certificate
- D. MD5
Answer: D
Explanation:
Reference:
Using_OSPF_to_Advertise_Remote_VPN_Subnets
NEW QUESTION # 43
......
Cisco 500-220 exam covers various topics, such as Meraki architecture, cloud-based network management, security and access control, wireless LAN and WAN technologies, network monitoring, and troubleshooting. 500-220 exam is designed to test the candidate's understanding of Meraki's cloud-based management platform, network design concepts, and implementation strategies. 500-220 exam also assesses the candidate's ability to identify and resolve network issues, as well as their knowledge of industry best practices.
Cisco 500-220 certification exam is an important step for IT professionals seeking to demonstrate their expertise in deploying and managing Cisco Meraki solutions. Candidates who pass the exam will earn the Cisco Meraki Solutions Specialist certification, which is recognized in the industry as a mark of excellence. To prepare for the exam, candidates should have a strong understanding of networking fundamentals and experience working with cloud-managed networking solutions. Cisco offers a variety of training resources to help candidates prepare for the exam, and passing the exam can open the door to new career opportunities.
Use Valid New 500-220 Test Notes & 500-220 Valid Exam Guide: https://realexamcollection.examslabs.com/Cisco/Cisco-Meraki-Solutions-Specialist/best-500-220-exam-dumps.html