2023 156-835 exam torrent 156-835 Study Guide
Easily pass 156-835 Exam with our Dumps & PDF Test Engine
NEW QUESTION # 21
What is the Iterator process?
- A. Iterator is the process that simulates distribution in case of Appliance failure
- B. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
- C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
- D. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
Answer: B
Explanation:
Iterator is the process that follows Appliance recovery and simulates what was a distribution if recovered Appliance was alive. The Iterator process runs on the Security Management Server and simulates the distribution of the Security Gateways if the recovered Appliance was alive. This helps ensure that the network remains secure and the traffic flow is optimized.
NEW QUESTION # 22
What is the Iterator process?
- A. Iterator is the process that simulates distribution in case of Appliance failure
- B. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
- C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
- D. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
Answer: C
NEW QUESTION # 23
What is a downlink interface used for?
- A. To connect appliances to customer's infrastructure
- B. To connect Orchestrators to customer's infrastructure
- C. To connect in between Orchestrators
- D. To connect appliances to Orchestrators
Answer: D
NEW QUESTION # 24
What is the basic installation sequence of the Orchestrator in case of single Orchestrator?
1. Create a Security Group
2. Configure Default Gateway
3. Connect with Serial Console cable to the Orchestrator
4. Configure IP for one of its Management interfaces
5. Connect an appliance to a downlink port
6. Change Orchestrator amount to 1
7. Browse to the Orchestrator's WebUI
- A. 3-1-7-2-4-6-5
- B. 1-4-2-5-7-3-6
- C. 7-4-2-5-3-1-6
- D. 3-4-2-6-5-7-1
Answer: D
NEW QUESTION # 25
What kind of cluster Dual-Site can be compared to?
- A. Active-Standby only
- B. VSLS only
- C. Active-Standby or VSLS
- D. Active-Active
Answer: D
NEW QUESTION # 26
What is the difference between Dual-Site and Multi-Room?
- A. Multi-Room is a kind of Dual-Site deployment within the same building
- B. Multi-Room is Active / Standby and Dual-Site is Active / Active
- C. Multi-Room is a Single-Site deployment where all Appliances are connected to both orchestrators
- D. This is the same
Answer: A
NEW QUESTION # 27
What is a Security Group?
- A. Group of appliances with enabled NGTX software blades
- B. Group of security gateways
- C. Group of security administrators
- D. Logical group of computer and network resources
Answer: B
NEW QUESTION # 28
When running ifconfig command on an Appliance, there are interfaces shown in the list: ethl-Sync and eth2-Sync. What is the purpose of these interfaces?
- A. These interfaces are not in use. Security GW module use Sync interface for synchronization
- B. These interfaces are bond members (slaves) of Sync Bond
- C. These interfaces represent physical Sync interface at the front panel of appliance
- D. These interfaces can be used as backup for Sync interface
Answer: C
NEW QUESTION # 29
What is the default IP range of CIN network (with no increment)?
- A. The same as Management network
- B. 192.168.1.0
- C. 192. 0 .2 .0
- D. 198 .51 .100. 0
Answer: D
NEW QUESTION # 30
What cannot be learned from the output of asg perf -v -p command?
- A. Real-time throughput
- B. Average CPU usage on Appliances
- C. Per-path distribution
- D. Average CPU usage on Orchestrators
Answer: D
NEW QUESTION # 31
How many power supplies are presented on MHO-170?
- A. 1 with option for 2
- B. 0
- C. 1
- D. 2
Answer: B
NEW QUESTION # 32
What is the default Distribution mode?
- A. User
- B. Auto-topology
- C. Network
- D. Manual-General
Answer: D
NEW QUESTION # 33
What is the default range of physical ports for downlinks on Orchestrator MHO-170?
- A. 17 - 31
- B. 25 - 32
- C. 3 - 16
- D. 1 - 16
Answer: A
NEW QUESTION # 34
What is the purpose of RJ-45 connectors located at the front panel of the Orchestrator MHO-170?
- A. Two Out-of-band interfaces for access to Orchestrator itself
- B. 1Gbps connectivity for Security Groups
- C. Out-of-band interface for access to Orchestrator itself and Serial Console connector
- D. Reserved for internal purposes. Not in use
Answer: C
NEW QUESTION # 35
Where should sx_api_ports_dump,py command be ran?
- A. Orchestrator
- B. Security Group
- C. Management server
- D. SMO Appliance
Answer: A
NEW QUESTION # 36
There is a Security group of 10 Appliances and all of them are up and running. How many Appliances within a Security Group keep the same connection in its connection table in case of NAT?
- A. 0
- B. All 10
- C. 1
- D. Between 2 and 4
Answer: D
NEW QUESTION # 37
What is the minimal amount of cables needed in order to connect an Appliance to an Orchestrator?
- A. Four cables: uplink, downlink, SYNC and Management
- B. Three cables: uplink, downlink, SYNC
- C. One Downlink cable only
- D. Two cables: one uplink and one downlink
Answer: C
NEW QUESTION # 38
What command should be used for collecting diagnostic information about the orchestrator?
- A. orch_info
- B. cpinfo
- C. asg pert -v
- D. cpview
Answer: A
NEW QUESTION # 39
What is the default range of physical ports for downlinks on Orchestrator MHO-140?
- A. 27 - 47
- B. 1 - 48
- C. 1 - 25
- D. 25 - 47
Answer: A
NEW QUESTION # 40
What cannot be a reason for DETACHED status of Appliance when running asg monitor command?
- A. There's an issue with Downlink cable
- B. Appliance reboots
- C. Appliance is a member of Security Group, but currently disconnected
- D. Appliance installed with R80.20
Answer: D
NEW QUESTION # 41
......
156-835 PDF Pass Leader, 156-835 Latest Real Test: https://realexamcollection.examslabs.com/CheckPoint/CCME/best-156-835-exam-dumps.html